PROFI №5

Haracteristic:

ACCELERATOR OF CONCRETE MIX AND BUILDING MORTAR SOLIDIFICATION FOR WINTER TIME (DOES NOT CONTAINS CHLORIDES)

Highly-effective additive Profi №5 provides possibility to do concreting in winter time under low temperatures conditions ( till - 20°C) without additional warming-up for poured concrete.

Benefits from the accelerator:

Water amount reducing by 10%;
Concrete consumption reduces by 10-15%;
Reducing time for concrete solidification and hardening;
Additive increase adhesion effect between armature and concrete;
Increase concrete density;
Surface free from salt stains;
Profi №5 adds into mortar as aquoes solution.
There is two ways to add the additive:
With defined amount of the water;
Preliminary mixing the additing into 20% prescriptional amount of the water. Need to be added in 3 minutes before the end of the stirring.
After adding the additive mix must be thoroghly stirred.
Concrete mix with additive should be applied in 20-30 minutes after the stirring.
Before applying concrete with additive, snow and frazil must be removed from worksurfaces.
Concrete temperature before accelerator additing must be no less than +12°C.

CONSUMPTION:

Recommended dosage (in % from the volume of concrete):
At air temprature from -5°C till -10°C – 0.55% (0.25 kg of 50 kg)
At air temprature from -11°C till -20°C – 1.1% (0.5 kg of 50 kg)

STORAGE:

Warranty period of product storage – 2 years from product manufacture date.
Freezing do not affect on product quality values.
After defrosting product should be thoroghly stirred.

Security measures:

S2 Keep out of the reach of children
S45 In case of accident or if you feel unwell seek medical advice immediately (show the label where possible)

Back to list