Instant dry thixtropic (non-flowing) paint for interior work. Intended for wall and celling painting of public and living rooms. Used for finishing primed concrete and brick surfaces, acrilyc embossed and fiberglass wallpapers, and other tile materials. Painted surface can be washed.


Surface should be dry, without grease and any dirt. Previously painted surfaces should be cleaned from old vanish flaking layers. It can be done with paint stripper LARAFĒNS. Shining surface, if it is possible, should be polished till it became matt and thoroughly cleaned.


Porous and highly absorbent surfaces should be processing with impregnating primer DISP BASE. For priming the surface can be used DISP 7, diluted with water till 25% from the paint volume. Rough surface should be puttied.


Before using the paint it should be thoroughly stirred and diluted with water, if it is necessary. Paint need to be applied in 1-2 layers. Work tools should be washed by the water.


Binder Acrylic dispersion
Solvent Water
Gloss level Matt
Toning system Tintorama/rpynna 2, BIOLAR MIX
Work tools Brush, paint roller, paint sprayer
Consumption (for 1 layer) 1 l/ 6-8 m2
Drying time at a temperature +20°C and 50% RH 1 hour
Package 1l; 2,5l; 4,5l; 9,5l
Storage 12 months at a temperature higher than 0°С

Back to list