Two component acid-curing parquet varnish


Two component acid-curing parquet varnish is intended for creating light surface with high hardness and durability.


Surface should be dry and clean. If there is an old varnish coating on wooden surface, then it should be removed. The surface should be grind with sandpaper till a matt and thoroughly vacuumed.


Varnish should be mixed with hardener in proportion 10:1, thoroughly stirred and left for a few minutes. While applying the varnish drafts and direct sun rays should be avoided. Apply one layer with brush or felt roller. Leave to dry, then slightly grind the surface with sandpaper and vacuum the room. Apply one or two more layers. Varnish mixed with hardener should be used during one day. Work tools should be cleaned with solvent.

Binder Carbamide and alkyd resins
Solvent 646
Gloss level Glossy and half-matt
Work tools Brush, felt roller
Consumpsion (for 1 layer) 1l / 6-8 m2
Drying time at a temperature +20°C and 50% RH, first layer 1 hour
Surface layer 2 hours
Final hardening 1 week
Package 3 l


S2: Keep out of the reach of children.

S25: Avoid contact with eyes.

S37/39: Wear suitable gloves and eye/face protection.

S46: If swallowed, seek medical advice immediately and show this container or label.


Contains butanol and xylol.

R10: Flammable.

R20/21/22: Harmful by inhalation, in contact with skin and if swallowed.

R37/38: Irritating to respiratory system and skin.

R41: Risk of serious damage to eyes.

R67: Vapours may cause drowsiness and dizziness.

Back to list